Dubbing A Cassette Tape; Playing And Recording Video Tapes - Optimus PROFFESIONAL SERIES STAV-3370 Owner's Manual

Dubbing a Cassette Tape

Playing and Recording
Video Tapes
You can copy, or dub, a cassette tape from one cassette deck to another.
You can use either deck as the playback or recording deck. However, if you
want to monitor the cassette deck during dubbing, use the deck connected to
the jacks as the source, and the deck you connected to the
VCR/TAPE 1
jacks as the recording deck. Then press
appears on the display. See "Using the TAPE 2 MONITOR Button" on the previ-
ous page.
You can connect two video sources to the receiver. If you connect a VCR to the
VCR/TAPE 1 audio and video jacks, you can copy video cassette tapes from one
VCR to another and monitor the dubbing process.
Playing a Video Cassette Tape
To play a video tape, load the tape into the VCR connected to either
or . Press the button (
LD VCR/TAPE 1
VCR is connected to.
VCR
instructions to begin playback. If you connected a monitor to the receiver's
jack, you can view the program on that monitor.
MONITOR TV
Copying a Video Cassette Tape
Follow these steps to copy a video tape from one VCR to another.
1. Load the tape you want to copy into a VCR connected to
2. Load a blank tape (or one you want to record over) in the VCR connected
to the jacks.
VCR/TAPE 1
3. Press .
LD
4. Begin recording and playback on the VCRs.
Cassette Deck/VCR Features
TAPE 2 MONITOR
or ) that corresponds to the jack the
LD
or appears on the display. Follow the VCR's
LD
TAPE 2
until
TAPE 2
VCR/TAPE 1
TO
LD .
19