Cassette Deck/Vcr Features; Using The Vcr/Tape 1 Button; Using The Tape 2 Monitor Button; Recording A Program Source - Optimus PROFFESIONAL SERIES STAV-3370 Owner's Manual

Cassette Deck/VCR Features

Using the VCR/TAPE 1
Button
Using the TAPE 2
MONITOR Button

Recording a Program Source

18
You can connect two cassette decks to the receiver. Selecting either
or lets you hear the playback from the cassette deck you
1 TAPE 2 MONITOR
connected to the receiver's corresponding (
jacks.
Press . VCR appears on the display. You hear the playback from the
VCR/TAPE 1
cassette deck or VCR you connected to the receiver's
Press .
TAPE 2 MONITOR TAPE 2
program source you selected. You can hear playback or monitor a recording
from the cassette deck you connected to the receiver's
The jacks continue to output the previously selected source when
TAPE 2 REC
you press
TAPE 2 MONITOR
To return to the previous source, press
appears.
Notes:
• If you press
TAPE 2 MONITOR
nor recording, the receiver mutes the current audio source. To hear the
audio source, press
display.
• Do not press
TAPE 2 MONITOR
nected to
TAPE 2 REC
second.
The receiver sends the audio program source you select—
, , ,
MONITOR LD CD TUNER
jacks.
MONITOR REC
The control does not affect the level of the signal going to the tape
VOLUME
decks.
VCR/TAPE 1
appears on the display along with the last
.
TAPE 2 MONITOR
when the cassette deck is neither playing
until
TAPE 2 MONITOR TAPE 2
while you are recording on the deck con-
. If you do, the recording is interrupted for about 1
, —to the
PHONO VCR/TAPE 1 OUT
VCR/TAPE
, )
TAPE 2 MONITOR
jacks.
VCR/TAPE 1
jacks.
TAPE 2 MONITOR
again so TAPE 2 dis-
disappears from the
,
VCR/TAPE 1 TAPE 2
(audio) and
TAPE 2