Advertisement
If you use a cassette with msxtte
mcrnory, you can label a cmsette. L&C& can
consist of up to 10 characters ancl is stored in cassette memory. When you insert
the labeled cassette and when the POWER switch is set to CAMERA or VCR, the
label is displayed for about five seconds.
1 Insert the cassette you want to label.
] Set the POWER switch to CAMERA
or VCR.
1 I%xm MENU,
ihen tusn the SEL/P~JSH EXK
dial to select TAPE TITLE in
then pre5s the dial (p. 213). Tape title display appears.
Turn the SEL/PUSH
EXEC dial to select the c&xnr~ of the desised chasacter,
then press the dial.
Turn the !XL/lWSH
EXE
dial TV select the desired charackr,
then press the
dial.
Repeat steps 4 and 5 until you finish the lalxl.
Turn the SEL/lYJSH
EXEC dial to select [SET/, then press ihe dial.
The label is stored in the memo~.y.
Advertisement
