Toro 30853 Operator's Manual page 6

110-8869
1. Warning—read the Operator's Manual, do not operate this
machine unless you are trained.
2. Thrown object hazard—keep bystanders a safe distance
from the machine.
3. Tipping hazard—slow machine before turning, do not turn
at high speeds; lower the cutting unit when driving down
slopes; use a rollover protection system and wear the seat
belt. Always wear a seat belt when a ROPS is in place.
4. Warning—do not park the machine on slopes; engage the
parking brake, lower the cutting decks, stop the engine, and
remove the ignition key before leaving the machine.
5. Warning—read the Operator's Manual, do not tow the
machine.
110-8921
1. Traction unit speed
2. Slow
3. Fast
(Affix over Part Number 110–8869 for CE*)
*This safety decal includes a slope warning required on the machine fro compliance to
the European Lawn Mower Standard EN ISO 5395:2013. The conservative maximum
slope angles indicated for operation of this machine are prescribed by and required by
1. Warning—read the Operator's Manual, do not operate this
machine unless you are trained.
2. Thrown object hazard—keep bystanders a safe distance
from the machine.
3. Tipping hazard—do not operate on slopes greater than 15°;
lower the cutting decks when operating on slopes; wear
the safety belt.
4. Warning—do not park the machine on slopes; engage the
parking brake, lower the cutting decks, stop the engine, and
remove the ignition key before leaving the machine.
5. Warning—read the Operator's Manual before towing the
machine.
1. Read the Operator's Manual.
2. Power point—10 A
3. Headlights—10 A
4. Power—10 A
5. Engine start—15 A
6. Optional air ride seat suspension—20 A
7. Engine computer management C—7.5 A
8. Engine computer management B—7.5 A
9. Engine computer management A—7.5 A
6
110-8973
this standard.
117–0169