Sony HSC300RF Operation Manual page 40

Page name Item
Page No.
<AUTO IRIS> AUTO IRIS
M05
WINDOW
OVERRIDE
IRIS LEVEL
APL RATIO
IRIS GAIN
IRIS CLOSE
<LENS> F NO. DISP
M06
ALAC
AF DISPLAY
<MIC GAIN> MIC1
M07
MIC2
FRONT MIC +48V
<CALL/TALLY> CCU CALL
M08 (U13)
CAM CALL
UP TALLY BRIGHTNESS
CAMERA NUMBER
NUMBER DISPLAY
<OUTPUT FORMAT> CURRENT
M09 (U14)
40
Menus
Settings
ON, OFF
1, 2, 3, 4, 5, 6
–
99 to 99, ---
–
99 to +99, 0
–
99 to +99, 65
–
99 to +99, 0
ON, OFF
CONTROL, RETURN
AUTO, OFF
ON, OFF
20, 30, 40, 50, 60 dB
20, 30, 40, 50, 60 dB
ON, OFF
OFF, ON, ---
OFF, ON, ---
TALLY 0 to 100, 50
NUMBER 0 to 100, 50
---, 1 to 96
ON, OFF, AUTO
1080: 59.94i, 50i
720: 59.94P, 50P
Description
Selects the auto iris window:
1 2 3
4 5 6
The shaded parts indicate the area where light
detection occurs.
Set the override to temporarily change the reference
value for brightness of the automatic iris level in the
range of ±2 steps.
–99: Two steps to fully closed iris.
99: Two steps to fully opened iris.
--- : OFF
The setting returns to "---" when the power is turned
off.
±4 steps
Selects the iris indication on the panel when AUTO
IRIS is off:
CONTROL: To display the value from the camera
RETURN: To display the value returned from the lens
(When AUTO IRIS is ON, the value returned from the
lens is always displayed.)
With AUTO selected, the status is displayed at the
right.
(ACTIVE): Compensation is in progress.
(WAIT): Waiting for completion of lens initialization
(STOP): Compensation is turned off for a non-
applicable lens
Valid only in standalone operation.
--- : When a CCU is connected (cannot be changed)
AUTO: When HDLA is attached, corresponds to the
UP TALLY switch setting.
Displays the current format.