Sony HSC300RF Operation Manual page 31

Page name Item
Page No.
<'!' IND> ND
02 (U05)
CC
WHITE
5600K
GAIN
SHUTTER
FAN
EXT
FORMAT
<VF MARKER> MARKER
03 (U06)
LEVEL
CENTER
SAFETY ZONE
EFFECT
ASPECT
MASK
SAFETY
Settings
[IND] ON, OFF
[NORMAL] 1, 2, 3, 4, 5
(combination allowed)
[IND] ON, OFF
[NORMAL] A, B, C, D, E
(combination allowed)
[IND] ON, OFF, ---
[NORMAL] P, A, B (combination
allowed)
[IND] ON, OFF, ---
[NORMAL] ON, OFF
[IND] ON, OFF, ---
[NORMAL] L, M, H (combination
allowed)
[IND] ON, OFF, ---
[NORMAL] ON, OFF
[IND] ON, OFF
[NORMAL] AUTO1, AUTO2, MIN,
MAX
[IND] ON, OFF
[IND] ON, OFF
[NORMAL]
1080-59.94i, 1080-50i,
720-59.94P, 720-50P
ON, OFF
WHITE, BLACK, DOT
0 to 100, 40
ON, OFF
1, 2, 3, 4
ON, OFF
80.0, 90.0, 92.5, 95.0%
ON, OFF, (FOCUS)
ON, OFF
16:9, 15:9, 14:9, 13:9, 4:3, (4.3)
ON, OFF, (ON)
0 to 15, 12
ON, OFF, (AREA)
80.0, 90.0, 92.5, 95.0%
Description
[IND]: Enable/disable the '!' indication (page 14).
[NORMAL]: Specify the conditions under which the '!'
indication is not to be displayed even if [IND] is ON.
(By specifying the standard or normal conditions
here, non-standard or abnormal conditions can be
found using the '!' indication in the viewfinder.)
e.g.: With the default setting of ND, the '!' indication is
displayed when an ND filter other than 1 is selected.
---: When a CCU is connected (cannot be changed)
CC: HSC300RF/HSC300R only
Sets display of all markers ON/OFF.
1: Entire cross
2: Entire cross with a hole
3: Center
4: Center with a hole
(FOCUS): Displayed when INDICATOR of <FOCUS
ASSIST> is ON.
(4.3): If VF SCAN is set to 4:3 when HDLA attached
(cannot be changed)
(ON): If VF SCAN is set to 4:3 when HDLA attached
(cannot be changed)
Set the level to darken outside the aspect area.
For the safety marker in Aspect mode.
(AREA): Displayed when AREA MARKER of <FOCUS
ASSIST> is ON.
31
Menus