Parts Lists - Viessmann vitoladens 300-t Service Instructions Manual

Parts lists

When ordering spare parts:
Quote the part no. and serial no. (see
type plate) and the position number of
the required part (as per this parts list).
Obtain standard parts from your local
supplier.
001 Boiler door (with pos. 002 and 003)
002 Gasket 16 x 12 mm
003 Thermal insulation block for the
boiler door
006 Hinge pin
008 Combustion chamber VHG
009 Gaskets (3 pce)
010 Sealing washer 45 x 3 mm
011 Cap G 1½
012 Brush handle
025 Ventilation air hose
028 Ventilation air hose adaptor
030 Silencer
031 Flue gas connection
032 Heat exchanger with gaskets pos.
036 and 041
033 Connection pipe
034 Seal ring
035 Boiler flue connection
036 Gaskets
038 Connection line
039 Siphon, complete
040 Boiler flue connection with spacer
ring
041 Gasket
042 Flue gas gasket
044 Spring hooks
045 Ventilation air hose
046 Hose clip
047 Air inlet
048 Bypass valve
049 Siphon
050 Corrugated hose
051 Gasket
052 Siphon mounting plate
200 Front panel (with pos. 214 and 303)
201 Back panel (with pos. 212)
203 Top panel
205 Side panel
206 Thermal insulation mat, back panel
207 Thermal insulation mat, front panel
208 Thermal insulation jacket
212 Edge protector
213 Logo
214 Cap
215 Retaining bracket, front
216 Retaining bracket, back
217 2–fold strain relief
218 Thermal insulation, connection line
219 Thermal insulation, heat exchanger
220 Thermal insulation mat, heat
exchanger, back
221 Thermal insulation mat, flue pipe
222 Thermal insulation mat, heat
exchanger
310 Plug M 14 with O-ring (only for
33/35.4 kW)
311 Plug M 14 with sealing sleeve (only
for 33/35.4 kW)
312 Plug (only for 33/35.4 kW)
313 Sealing set, test port, 2 pce (only for
40/42.8 and 50/53.7 kW)
Wearing part
013 Cleaning brush
Parts not shown
300 Spray paint, Vitosilver
301 Touch-up paint stick, Vitosilver
302 Fitting elements, thermal insulation
303 Decorative adhesive tape
305 Installation instructions
306 Service instructions
309 Connecting elements
Parts lists
15