Time Setting; Restore Default - Teac SDB440 User Manual

Digital terrestrial receiver

Table of Contents

and VBI (vertical blanking interval) modes. VBI mode simply passes the signal

to another source and therefore an additional teletext decoder is required.

Color Mode: The available options are User Mode, Movie, News and Sports

Chroma(Brightness,Contrast): Select the desired setting.

Once your

satisfied with your adjustments, press the EXIT key to return to the previous

menu, or press MENU key to close current window.

3.4 Time Setting

Daylight time: The available options are Auto,

Yes and No.

Country Name: The default is Australia.

Time Zone: In order to display the local time

correctly, it may be necessary for you to set a

time offset indicating the difference between

local time and GMT. Here there are eight

available options such as SA, WA, TAS, NT,

AUTO, NSW/ACT, VIC and QLD. Please use

keys to select one amongst them.

Select the Restore Default item in the Setup

System menu and press the OK key. A

message box will seek your confirmation. Press

OK key to restore settings to factory defaults.

Note: Reset to Defaults should be used with

care as all programs found will be erased and

any parameters shall be reset to factory

defaults.

Table of Contents