Ipv6 In Ipv4 Tunneling (Stateful) - D-Link EBR-2310 User Manual

Section 3 - Configuration
My IPv6 Connection: Select IPv6 in IPv4 Tunnel from the drop-down
menu.
IPv6 in IPv4 Tunnel
Enter the settings supplied by your Internet
Settings: provider (ISP).
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN Link-Local
Displays the Router's LAN Link-Local Address.
Address:
Enable Check to enable the Autoconfiguration feature.
Autoconfiguration:
Autoconfiguration Select Stateless. Refer to the previous page for
Type: Stateful.
Router Enter the Router Advertisement Lifetime (in
Advertisement
minutes).
Lifetime:
D-Link EBR-2310 User Manual

IPv6 in IPv4 Tunneling (Stateful)

53