Panasonic DMP-BDT570 Operating Instructions Manual page 15

≥ Refer to the operating instructions of the hub or router.
≥ Do not use this unit to connect to any wireless network for
which you do not have usage rights.
Using these networks may be regarded as illegal
access.
≥ If you have trouble getting online on your PC after
performing network settings on this unit, perform the
network settings on your PC.
≥ Please be aware that connecting to a network without
encryption may result in the leaking of data such as
personal or secret information.
An SSID (Service Set IDentification) is a name used by
*1
wireless LAN to identify a particular network. Transmission
is possible if the SSID matches for both devices.
The wireless router compatible with Wi-Fi Protected
*2
Setup may have the mark.
TM
Connections and settings
Firmware updates
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.*
When a new firmware version is available, the
following message is displayed.
New Version: X.XX
Current Installed Version: X.XX
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
After the firmware is installed, "Finish" will be
displayed on the unit's display. Unit will restart
and the following screen will be displayed.
The firmware has been updated.
Current Version
≥ You can also download the latest firmware from the
following website and store it to a USB device to
update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ To show the firmware version on this unit. (
"Firmware Version Information")
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set "Automatic Update Check" to "Off". (
* You must agree to the terms of use for the Internet function
and the privacy policy. (
- 15 -
Firmware Update
Yes No
OK
RETURN
: x.xx
33)
31, "Notice")
33,