ViewSonic PLED-W500 User Manual page 37

Hide thumbs Also See for PLED-W500:

Table of Contents

Information

Display the projector information for source, resolution, software version, color

space and aspect ratio on the screen.

Advanced

Refer to page 38.

LED Calibration

Use this function to adjust LED color performance. Please wait for 10 seconds to

finish the white color fine tune process.

This function will start to work after the LED used hour being greater than 500 and

you continues using the projector for more than 2 hours.

If you didn't implement the LED calibration after the LED used hour being greater than 500 and you contin-

ues using the projector for more than 2 hours, it will pop up the message to remind you.

Table of Contents