Samsung CLX-3170FN User Manual page 77

MESSAGE
The memory is full.
Memory Full
There is a problem
Network Error
with the network.
The receiving fax
[No Answer]
machine has not
answered after
several redial
attempts.
The toner cartridge
NonSAMSUNG
which the arrow
Toner
indicates is not a
Samsung-genuine
cartridge.
Press OK to toggle
the message to Stop
or Continue.
The speed button or
Not Assigned
speed dial number
you tried to use has
no number assigned
to it.
Single page data
One Page is
exceeds the
Too Large
configured mail size.
There is a problem in
Open Heat Error
the fuser unit.
Cycle Power
You are in the Add
Operation
Page/Cancel Job
Not Assigned
operation, but there
are no jobs stored.
The output tray of the
Out-Bin Full
machine is full of
paper.
There is a problem in
Over Heat Error
the fuser unit.
Cycle Power
Downloaded From ManualsPrinter.com Manuals
SUGGESTED
MEANING
SOLUTIONS
Delete unnecessary fax
jobs and retransmit after
more memory becomes
available. Alternatively,
split the transmission
into more than one
operation.
Contact your network
administrator.
Try again. Make sure
that the receiving
machine is operational.
You can select either
Stop or Continue with
the left/right arrow.
If you select Stop by
pressing OK on the
control panel, the
machine stops printing.
If you select Continue,
the machine keeps
Stop
printing, but the quality
cannot be guaranteed.
If you do not select any,
the machine will work as
Stop is selected.
Replace the
corresponding toner
cartridge with a
Samsung-genuine
cartridge. (See
"Replacing the toner
cartridge" on page 68.)
Enter the number
manually using the
number keypad or store
the number or address.
Reduce the resolution
and try again.
Turn the power switch
off and on. If the problem
persists, call for service.
Check the display to see
if there are any
scheduled jobs.
Remove paper.
Turn the power switch
off and on. If the problem
persists, call for service.
MESSAGE MEANING
Paper has jammed in
Paper Jam 0
the feeding area of the
Open/Close Door
tray.
Paper has jammed in
Paper Jam 1
the paper exit area.
Check Inside
Paper has jammed In
Paper Jam 2
the fuser area or
Check Inside
around the toner
cartridge
The toner cartridge
Refilled Toner
you have installed is
not genuine or refilled.
The arrow indicates
which color toner
cartridge.
This message
Replace Toner
appears between
Toner Empty and
Toner Low status.
The life of the part
Replace
expires totally.
[xxx]
The life of the part
Replace
expires soon.
[xxx] Soon
The life span of the
Replace/Install
waste toner tank has
Toner Waste Bin
expired and the printer
will stop printing until
a new waste toner
tank is placed into the
machine.
The machine is
Retry Redial?
waiting for a specified
time interval to redial
a previously busy
station.
The scan unit is not
Scan Unit Open
securely latched.
The scanner module
Scanner locked
is locked
There is a problem in
Send Error
SMTP authentication.
(AUTH)
There is a problem in
Send Error
DNS.
(DNS)
SUGGESTED
SOLUTIONS
Clear the jam. (See "In
the tray 1" on page 73.)
Clear the jam. (See "In
the fuser unit area" on
page 73.)
Clear the jam. (See "In
the paper exit area" on
page 74.)
The print quality may get
poor if the refilled toner
cartridge is installed,
since its characteristics
may significantly differ
from the genuine. We
recommend Samsung-
genuine color toner
cartridge.
Replace the toner
cartridge with a new one.
(See "Replacing the
toner cartridge" on
page 68.)
Replace the part with a
new one. Call for
service.
See "Checking
replaceables" on
page 71 and call for
service.
Replace the waste toner
bank with a new one.
(See "Replacing the
waste toner
container" on page 70.)
You can press OK to
immediately redial, or
Stop/Clear to cancel the
redial operation.
Close the scan unit it
locks into place.
Turn the power switch
off and on. If the problem
persists, call for service.
Configure the
authentication setting.
Configure the DNS
setting.
Troubleshooting_ 77