Servicing Double-Insulated Mower; Servicing "On/Off" And Blade Brake System; Storage - Toro 20052 Operator's Manual

Servicing Double-insulated
Mower
In a double-insulated mower, two systems of insulation
are provided instead of grounding. No grounding means is
provided on a double-insulated mower, nor should a
means for grounding be added to the mower. Servicing a
double-insulated mower requires extreme care and
knowledge of the system, and should be done only by
qualified service personnel. Replacement parts for a
double-insulated mower must be identical to the parts they
replace. A double-insulated mower is marked with the
words "DOUBLE INSULATION" or "DOUBLE
INSULATED." The symbol (square within a square)
may also be marked on the mower.
Servicing "On/Off" and Blade
Brake System
The motor and blade are designed to stop within 3 seconds
after releasing the control bail. Ensure that the control bail
functions properly before each use of mower. If the blade
does not stop within 3 seconds, or if there is a grinding or
scraping metal-to-metal noise when the control bail is
released, contact your local Authorized Toro Service
Dealer for proper "On/Off" and blade brake adjustment or
replacement.

Storage

Store mower in a cool, clean, dry place. Cover mower to
keep it clean and protected.
1. Clean mower housing. See Cleaning section in
Maintenance chapter.
2. Remove grass clippings, dirt and grime from external
parts of the shrouding and top of mower housing.
3. Check condition of blade. See Blade section in
Maintenance chapter.
4. Tighten all nuts, bolts, and screws.
5. Your mower has been designed to be safe if left
continually on charge for extended periods of time. It
is recommended that the battery be left continually on
charge when it is not in use during the mowing season.
During the non-mowing season, the mower can be
unplugged and stored if the battery is fully charged.
EN–18