Philips RQ119x Manual page 57

Problem
Specific types
only: The shaver
is not entirely
clean after I clean
it in the Jet Clean
System.
Specific types
only: The Jet
Clean System
does not work
when I press the
on/off button.
Possible cause
The cleaning fluid in
the cleaning chamber is
soiled.
The cleaning fluid level
is too low. If the fluid
volume in the cleaning
chamber drops below
the minimum level
during the cleaning
program, the program
aborts.The cleaning
light and the 'cleaning
chamber empty' symbol
flash at intervals and
the holder returns to its
starting position.
You have used another
cleaning fluid than the
original Philips cleaning
fluid.
The Jet Clean System
is not connected to the
mains.
56
English
Solution
Empty and rinse the
cleaning chamber and
refill it with new cleaning
fluid.
Refill the cleaning
chamber with cleaning
fluid to a level between
the two lines (see
chapter 'Cleaning and
maintenance').
Only use HQ200
Philips Cleaning Fluid.
Put the small plug in the
Jet Clean System and
put the adapter in the
wall socket.