Leveling/Adjustments/Alignment - Viking 5 SERIES Installation Manual

Electrical Connection (4-wire)
(cont.)
7
8
1 1
Reattach access door.
Push supply cord toward terminal
block to relieve strain, reattach supply cord strain
relief bracket over supply cord.

Leveling/Adjustments/Alignment

2
1
Measure the four corners in cutout area to verify if For uneven or sloped floors, level unit with metal shims
flooring is level. only, as the adjustment required may exceed
the thread available in the leg.
3 4
m
5 c
0 . 9
Check that unit is level side to
Move unit into opening.
side and front to back. Side trim of the high corner
must be 3/8" (0.95 cm) above countertop.
20