Electrical Connection (4 Wire) - Viking 5 SERIES Installation Manual

Electrical Connection (4-wire)
1
2
Remove access door.
Remove supply cord strain relief
bracket and three supply cord mounting screws on
the terminal block.
3
4
Remove grounding screw. Cut-off Feed supply cord up through hole in bottom
and discard ground strap. of range back.
5
6
Attach ground lead (green)
Attach line #1 (red) and line #2 (black)
with ground screw that was removed.
leads to outside terminal. Attach neutral wire (white) to
center terminal on terminal block.
19