Download
Share
Print this page
Weslo bench600 User Manual
  1. Manuals
  2. Brands
  3. Weslo Manuals
  4. Fitness Equipment
  5. bench600
  6. User manual
Weslo bench600 User Manual

Weslo bench600 User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Enlarged version

ORDERING REPLACEMENT PARTS

If you encounter any difficulties or problems with this product, contact the ICON Fitness Lifestyle Ltd. office, or
write:
ICON Fitness Lifestyle Ltd.
Greenwich House
223 North Street
Sheepscar
Leeds LS7 2AA
West Yorkshire
Tel: Country Code: 0345-089009
0345-089009
Fax: 0113-2411120
To help us assist you, please be prepared to give the following information:
• The MODEL of the product (WLEMBE71000)
• The NAME of the product (WESLO
®
BENCH 600 weight bench)
• The SERIAL NUMBER of the product (see the front cover of this manual)
• The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 15 and the EXPLODED
DRAWING attached in the centre of this manual).
Part No. 171938 R1100A
Printed in Korea © 2000 ICON Health & Fitness, Inc.
Model No. WLEMBE71000
Serial No.
Write the serial number in the
space above for reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are
committed to providing
complete customer satisfaction.
If you have questions, or if
there are missing parts, we will
guarantee complete satisfaction
through our Customer Service
Department.
Please CALL:
0345-089009
Or WRITE:
ICON Health & Fitness Ltd.
Greenwich House
223 North Street
Sheepscar
Leeds LS7 2AA
West Yorkshire
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Visit our website at
www.weslo.com
new products, prizes,
fitness tips, and much more!

Advertisement

loading

Related Manuals for Weslo bench600

Summary of Contents for Weslo bench600

  • Page 1: Ordering Replacement Parts

    Number Decal To help us assist you, please be prepared to give the following information: • The MODEL of the product (WLEMBE71000) • The NAME of the product (WESLO ® BENCH 600 weight bench) QUESTIONS? • The SERIAL NUMBER of the product (see the front cover of this manual) As a manufacturer, we are •...

  • Page 2: Table Of Contents

    “U” Bracket User’s Manual Note: “#” Indicates an non-illustrated part. See the back cover of this manual for information about ordering replacement parts. Specifications are subject to change without notice. WESLO is a registered trademark of ICON Health & Fitness, Inc.

  • Page 3: Important Precautions

    REMOVING AND ATTACHING THE LAT TOWER IMPORTANT PRECAUTIONS To remove the Lat Tower (40), first remove the Knob (29) from the Frame (51). Next, remove the WARNING: indicated 5/16” x 2” Bolt (10), 5/16” Washers (3), To reduce the risk of serious injury, read the following important precau- and 5/16”...

  • Page 4: Before You Begin

    BEFORE YOU BEGIN To use the high pulley station or the low pulley sta- tion, make sure that the Upper Cable (37) is Thank you for selecting the versatile WESLO ® BENCH tions, please call our Customer Service Department at attached to the Weight Carriage (41) with a Cable 600 weight bench.

  • Page 5: Assembly

    HOW TO ADJUST THE WEIGHT BENCH ASSEMBLY The instructions below describe how each part of the weight bench can be adjusted. Inspect and tighten all parts Before beginning assembly, carefully read the • Tighten all parts as you assemble them, unless each time you use the weight bench.
  • Page 6 2. Press two 1 1/2” Square Inner Caps (6) into the 18. Attach the Lower Cable (30) to the Upper Cable Frame (51). Press a 1 1/2” Square Inner Cap (37) with a Cable Clip (39). (6) into each of the Stabilisers (49, 50). Wrap the Lower Cable (30) around a Pulley Attach the Frame (51) to the “H”...

  • Page 7: Washer 36

    16. Slide the Lat Tower (40) into the Frame (51). 6. Press 1 1/2” Square Inner Caps (6) into both The Lat Tower must be turned as shown. ends of the Leg Lever (45). Attach the Lat Tower to the Frame with a 5/16” x 2”...
  • Page 8 10. Press a 7/8” Round Inner Cap (53) into the 14. Press Square Inner Bushings (35) into the top Right Arm (58). Insert two 1 1/2" Square Inner and bottom of the Weight Carriage (41). Press Caps (6) into the Right Arm. a 1”...
  • Page 9 REMOVE THIS PART IDENTIFICATION CHART AND EXPLODED DRAWING FROM THE MANUAL 5/16" Nylon Locknut (1)–14 3/8" Nylon Locknut (15)–4 This chart is provided to help you identify the small parts used in assembly. Important: Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to see if it has been pre-assembled.

  • Page 10: Part List

    EXPLODED DRAWING—Model No. WLEMBE71000 R1100A To identify parts shown on this EXPLODED DRAWING, refer to the PART LIST on page 15.