Advanced Operations; Advanced Setup; On-Screen Setup Menus; Common Procedures In Setup Menu - Onkyo TX-SR309 Instruction Manual

Advanced Operations

Advanced Setup

On-screen Setup Menus

The on-screen setup menus appear only on a TV that
is connected to the HDMI OUT. If your TV is
connected to the MONITOR OUT V or the
COMPONENT VIDEO OUT, use the AV receiver's
display when changing settings.
Note
• The on-screen setup menus are displayed when:
– There is no video input, or
– The video input is 480p, 576p, 720p, 1080i, or 1080p.
Setup Menu
a
1. HDMI Input
b
2. Component
c
3. Digital Audio
d 4. Sp Config
5. Sp Distance
e
f 6. Level Cal
g 7. Audio Adjust
h 8. Source Setup
i
9. Hardware
j
10. HDMI Setup
a HDMI Input
(➔ page 30)
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TUNER
TV/CD
b Component
(➔ page 30)
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TUNER
TV/CD
c Digital Audio
page 30)
(➔
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TUNER
TV/CD
d Sp Config
(➔ page 31)
Subwoofer
Front
Center
Surround
Crossover
Double Bass
e Sp Distance
page 31)
(➔
Unit
Left
Center
Right
Surround Right
Surround Left
Subwoofer
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TUNER
TV/CD
f Level Cal
(➔ page 32)
Left
Center
Right
Surround Right
Surround Left
Subwoofer
g Audio Adjust
(➔ page 32)
Input Ch (Mux)
Input Ch (Mono)
Panorama
Dimension
Center Width
Center Image
Listening Angle
h Source Setup
page 33)
(➔
A/V Sync
Name
Audio Selector
Fixed Mode
i Hardware
(➔ page 34)
Volume OSD
Remote ID
AM/FM Freq Step
Auto Standby
j HDMI Setup
page 35)
(➔
HDMI Ctrl (RIHD)
HDMI Through
Audio TV Out
Audio Return Ch
LipSync

Common Procedures in Setup Menu

ENTER
q/w/e/r
SETUP
The on-screen setup menus appear on the connected TV
and provide a convenient way to change the AV receiver's
various settings. Settings are organized into 10 categories
on the main menu.
Carry out the settings by using the on-screen display.
1 Press RECEIVER followed by SETUP.
Tip
• If the main menu doesn't appear, make sure the appropriate
external input is selected on your TV.
2
Use q/w to select a menu, and then press ENTER.
3
Use q/w to select target, and use e/r to change the
setting.
Press SETUP to close the menu.
Press RETURN to return to the main menu.
Note
• This procedure can also be performed on the AV receiver by
using SETUP, arrow buttons, and ENTER.
Remote indicator
RECEIVER
RETURN
En
29