Onkyo TX-NR905 Instruction Manual page 55

First Time Setup—Continued
1 Press the [RECEIVER] button,
followed by the [SETUP] button.
RECEIVER
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "1. Input/Output
Assign," and then press
ENTER
[ENTER].
The Input/Output Assign menu
appears.
ENTER
3
Use the Up and Down [
buttons to select "2. HDMI Input,"
and then press [ENTER].
ENTER
The HDMI Input menu appears.
1-2.HDMI Input
DVD
VCR/DVR
CBL/SAT
GAME/TV
ENTER
AUX1
AUX2
4
Use the Up and Down [
buttons to select an input selec-
tor, and use the Left and Right
ENTER
[ ]/[ ] buttons to select:
IN1: Select if the video component
is connected to HDMI IN 1.
IN2: Select if the video component
is connected to HDMI IN 2.
IN3: Select if the video component
ENTER
is connected to HDMI IN 3.
IN4: Select if the video component
is connected to HDMI IN 4.
- - -: Select this to upconvert and
output composite video,
S-Video, and component
video sources from the HDMI
outputs.
5
Press the [SETUP] button.
Setup closes.
Notes:
• Each HDMI IN cannot be assigned to more than one
input selector.
• For composite video, S-Video, and component video
upconversion for the HDMI OUT MAIN or HDMI
OUT SUB, the HDMI Monitor setting must be set to
Main or Sub, respectively (see page 52). See page 34
for more information on video signal flow and upcon-
version.
]/[ ]
• When an HDMI IN is assigned to an input selector as
explained here, the digital audio input for that input
selector is automatically set to the same HDMI IN.
See "Digital Input Setup" on page 58.
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.
]/[ ]
---
---
---
---
---
---
]/[ ]
55