(CD) FRONT R (BTL) (Target unit) TX-NR905 Rear Panel 3. Make sure that the following message appears on Front Panel. Ma in U p da te Mo de Ve r. 1 .0 1 /07 6 15 L If the version is not “1.01/07615L,”...
Page 2
TX-NR905 FIRMWARE UPDATE -2 Update Procedure (continued) 5. Make sure that a COM port to which RS232 straight cable is connected is correctly selected. 6. Click "Main Update in the window. 7. Make sure that the writing starts. This information will appear when the click of [Main Update] is accepted.
Page 3
TX-NR905 FIRMWARE UPDATE -3 Preparation for Update (Main) Software 1. "Setup_Updater905E.zip" Unzip this file in advance. (File name depends on the version.) Installation Procedure 1. Exit from every running application software. 2. Double click "setup.exe" in the folder extracted from "Setup_Updater905E.zip.”...