Canon POWERSHOT N2 User Manual page 108

Using Eco Mode
This function allows you to conserve battery power in Shooting mode.
When the camera is not in use, the screen quickly darkens to reduce
battery consumption.
Screen Brightness
Adjust screen brightness as follows.
Downloaded From camera-usermanual.com Canon Manuals
1
Configure the setting.
●
Choose [Eco Mode], and then choose
[On].
●
[ ] is now shown on the shooting
screen ( = 127).
●
The screen darkens when the camera
is not used for approximately two
seconds; approximately ten seconds
after darkening, the screen turns off.
The camera turns off after approximately
three minutes of inactivity.
2
Shoot.
●
To activate the screen and prepare for
shooting when the screen is off but the
lens is still out, press the shutter ring
halfway.
●
Choose [LCD Brightness], and then touch
the desired position on the bar to adjust
the brightness.
Formatting Memory Cards
Before using a new memory card or a card formatted in another device,
you should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy
images on the memory card to a computer, or take other steps to back
them up.
1
Access the [Format] screen.
●
Touch [Format].
2
Choose [OK].
●
Touch [OK].
3
Format the memory card.
●
To begin the formatting process, touch
[OK].
● When formatting is finished, [Memory
card formatting complete] is displayed.
Touch [OK].
● Formatting or erasing data on a memory card only changes file
management information on the card and does not erase the data
completely. When transferring or disposing of memory cards,
take steps to protect personal information if necessary, as by
physically destroying cards.
●
The total card capacity indicated on the formatting screen may be
less than the advertised capacity.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Creative Shot Mode
3
Auto Mode / Hybrid Auto
Mode
4
Other Shooting Modes
5
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
108