Connecting External Av Signal Source; Connecting Headphone - Teac DVP702 User Manual

System Connections

Connecting External AV Signal Source

Use the AV cable to connect external AV signal source, such as DVD to the unit. After
connecting, switch AV IN/OUT to AV IN.
Note: Noise may occur when there is an external audio signal input while playing a DVD
disc. Unplug the audio cord to clear the noise.

Connecting Headphone

Connect headphone to the headphone jack of the unit. When the headphone is
connected, the speakers will turn off automatically.
Note: Excessively loud volume could damage your hearing. Turn down the volume
before you connect headphone, and then raise the volume to comfortable level.
14