Onkyo HT-R8230 Instruction Manual page 11

Connecting to audio/video equipment
Video Camera,
Game Device, etc.
(VIDEO 3)
AUDIO VIDEO
DIGITAL
OUT OUT
OUT
R L
COAXIAL
2
*
AM
To connect the digital
output from satellite
tuner etc. connected to
the VIDEO 1, VIDEO 2
or VIDEO 3 jacks to the
COAXIAL or OPTICAL
input jack of this unit, it is
required to change the
assignment of digital
inputs to input sources by
referring to "Setting the
digital inputs" on page
21.
R L
AUDIO
OUT
Video cassette player,
Satellite tuner, LD
3
player , etc. (VIDEO 2)
*
1
* If the DVD player has both 5.1 channel audio outputs and 2 channel audio outputs, and you want to connect the DVD player only using
the FRONT L/R jacks on the HT-R8230, use the 2 channel audio output jacks on the DVD player.
If the DVD player only has the 2 channel audio outputs, connect it to the FRONT L/R jacks.
* 2 To connect the digital output from DVD player connected to the DVD jacks to this unit, use the COAXIAL input jack.
To connect the digital output to the OPTICAL input jack of this unit, it is required to change the assignment of digital inputs to input
sources by referring to "Setting the digital inputs" on page 21.
* 3 If you have an LD player with AC-3RF output, connect via an AC-3RF demodulator to one of the HT-R8230's DIGITAL INPUT
terminals.
DVD player or component
1
with 5.1 ch output (DVD)*
VIDEO AUDIO OUT
FRONT SURR CENTER SUBWOOFER
OUT
R L R L
FM
ANTENNA
75
R L
VIDEO AUDIO VIDEO
OUT IN IN
VCR (VIDEO 1)
Caution
Make sure that the capacity of the other components connected
to this unit does not exceed the capacity that is printed on the
rear panel (120 watts).
FRONT FRONT CENTER
SPEAKERS B SPEAKERS A SPEAKER
R L R L
Video
Audio (L)
Audio (R)
Coaxial plug
R L
AUDIO VIDEO
OUT OUT
SURROUND
SPEAKERS
AC OUTLET
R L
DO NOT connect the
power cord at this
time.
Audio/video
connection
cable
Coaxial cable
(Digital signal)
Signal flow
11