Onkyo R-805TX Instruction Manual page 43

Sleep function
The Sleep function can be performed only by
using remote controller.
The SLEEP timer automatically sets the entire
system to Standby mode after a specified
period of time.
1
Start playing something you would
like to listen to.
(CD, tape, MD or radio broadcast).
2
Press the SLEEP button repeatedly to
set the desired sleep time.
SLEEP
TIMER AUTO
SLEEP
The time value will decrease from 90 min-
utes to 10 minutes in steps of 10 minutes.
After a specified period of time, the unit
will be automatically placed in Standby
mode.
• To check the remaining time while the
SLEEP function is active, press the SLEEP
button.
• After CD dubbing is complete, the unit
will be placed in Standby mode.
Cancelling the SLEEP setting
Press the SLEEP button repeatedly until the
SLEEP indicator on the display disappears.
STANDBY/ ON
GRAPHIC EQ
CLOCK SLEEP EFFECT MODE
SLEEP
TUNER INPUT
PRESET
F M A M
TAPE
PAUSE / STEP DVD
M D
REPEAT SCROLL
PLAY MODE CLEAR REC
REPEAT RANDOM C D
MEMORY CLEAR
DISC
REPEAT PLAY MODE CDR
TONE CLEAR REC
MUTING
TIMER 1 2 3
4 5 6
UP/DOWN
7 8 9
VOLUME
ACOUSTIC
PRESENCE
- - / - - -
ENTER 10 / 0
Notes for timer setting
• Make sure that the clock has been set cor-
• After setting the timer, be sure to set this
• When the power is turned on by one of
• If you press the SLEEP button during timer
• If more than two timer mode settings are
STEREO
MIN
• The timer recording setting will be can-
Time
rectly before setting the timer.
unit in Standby mode. If this unit is not in
Standby mode, the timer will not work.
the timer mode settings, the other timer
modes may not be activated at their ON
time. The power will be switched off by
the first timer mode at its OFF time. Set a
gap of one minute or more between the
OFF time and ON time for each timer set-
ting. (See the figure below.)
play or timer recording, the power will be
switched off at the SLEEP timer's OFF
time.
made at the same time, the "WEEKDAY"
setting has the priority over the "WEEK-
END" setting. The "REC" mode setting
has no priority.
celled if the recording does not start at
the ON time (for example, if the power is
already on).
activate
WEEKDAY
REC
WEEKEND
9:00
ON
not activate
activate
10:00 11:00 12:00
OFF ON OFF
43