Onkyo R-805TX Instruction Manual page 23

Confirming/changing the RDS
station used by ACCUCLOCK
If you wish to know which RDS station has
been used to set the clock by ACCUCLOCK, or
to use a different RDS station signal to set
the clock, follow the steps below:
1
Press the TIMER button repeatedly
until "ADJUST" is selected on the dis-
play, then press the ENTER button.
TIMER
"AUTO" or "MANUAL" appears on the
display.
STANDBY/ ON GRAPHIC EQ
CLOCK SLEEP EFFECT MODE
TUNER INPUT
PRESET
F M A M
TAPE
PAUSE / STEP DVD
REPEAT SCROLL M D
PLAY MODE CLEAR REC
REPEAT RANDOM C D
MEMORY CLEAR
DISC
CDR
REPEAT PLAY MODE
TONE CLEAR REC
TIMER
MUTING
TIMER 1 2 3
4 5 6
UP/DOWN
7 8 9
VOLUME
ENTER
ACOUSTIC
PRESENCE
- - / - - - 10 / 0
ENTER
2
If "AUTO" appears on the display,
press the ENTER button. If "MANUAL"
appears on the display, press the
UP π or DOWN † button to select
"AUTO," then press the ENTER button.
The example shown above indicates that the
ACCUCLOCK function uses the RDS station
whose information appears on the display
(FM 88.10 MHz). If the frequency of the RDS
station has not been specified, "--:--"
ENTER
appears instead of the frequency of the sta-
tion. If you wish to change the selected RDS
station or if no RDS station is selected,
choose the desired RDS station by using the
UP π or DOWN † button, then press the
ENTER button.
UPπ/DOWN†
ENTER
MHz
23