Fiat Bravo Owner's Handbook Manual page 54

ALIGNMENT OF SET
TEMPERATURES
(MONO function)
Pressing button MONO automatically
aligns the temperature on the passenger's
side with that on the driver's side.
Turn the knob AUTO or MONO to
raise/reduce the temperature between the
two zones by the same value.
Press again MONO to disable the func-
tion.
CLIMATE CONTROL
COMPRESSOR ON/OFF
❄
Press button to switch on the climate
control compressor.
Compressor on
❒ button led ❄
on;
❒ symbol ❄
on the display, lit.
Compressor off
❒ button led ❄
off;
❒ symbol ❄
on the display, off;
❒ inside air recirculation off;
❒ AQS function disabled.
With the climate control compressor off,
it is not possible to admit air to the pas-
senger compartment with a temperature
below the outside temperature; in this
case symbol ò flashes on the display.
The switching off of the climate control
compressor remains in storage even when
the engine has been stopped. To restore
automatic control for switching on the cli-
mate control compressor, press button
or AUTO, in which case, the other man-
ual settings set will be cancelled.
AIR DISTRIBUTION SELECTION
Pressing one or more buttons
it is possible to choose manually 7 of the
possible air distributions to the passenger
compartment:
Q
Air flow to the windscreen and
front side window vents to demist
or defrost them.
Z
Air flow towards the front and
rear lower parts of the passenger
compartment. This type of distri-
bution allows heating of the pas-
senger compartment in the short-
est time.
Q
E
Splitting of the air flow between
Z
front and rear vents, centre and
side dashboard outlets, rear out-
let, windscreen and front side win-
dow demisting vents.
E
Air flow to the dashboard centre
and side outlets (passenger's
body).
❄
Q E Z
/ /
53