Siemens HiPath 3000 Administration Manual page 53

Administration via WBM (V2)
Network > IP configuration
With firmware V2, you must click on change mode first. Afterwards, the IP configuration
mode dialog opens.
Network > IP configuration > change mode
To enable VLAN discovery by DHCP, select DHCP used in the Discovery mode menu. After-
wards, click Submit.
Administration via Local Phone (up to V1R3)
|
--- Administration
|
--- Network
|
--- IP Configuration
|
--- VLAN discovery
A31003-S2010-M100-18-76A9
OpenStage HFA Family, Administration Manual
administration.fm
Administration
LAN Settings
3-9