Installing Hard Disk Unit (Optional) - Kyocera FS-6020 Service Manual

FS-6020

1-3-4 Installing hard disk unit (optional)

Procedure
1. Remove one screw and then remove the
optional interface slot cover.
2. Insert the hard disk unit into the hard disk
socket.
3. Reattach the optional interface slot cover to
its original position.
4. Format the hard disk. (Refer to the operation
guide.)
1-3-10
Optional interface
slot cover
Figure 1-3-15
Hard disk unit
Hard disk socket
Hard disk units that can be installed
(Microdrive)
Manufactured by IBM
Capacity
340 MB
512 MB
1 GB
Figure 1-3-16
Screw
Model number
DMDM-10340
DSCM-10512
DSCM-11000