Connecting The Indoor Fm Antenna - Onkyo 29400046 Instruction Manual

Setting the Mode Selector
Turn off the Universal Port-compatible Onkyo prod-
uct before setting the Mode selector.
• TUNER: Select this to listen to HD Radio.
• THROUGH: Select this to listen to the device con-
nected to the UP-HT1's Universal Port, for exam-
ple, an iPod in a UP-A1 dock.
• AUTO: When AUTO is selected, the source is
selected automatically when the input source is
changed on the Universal Port-compatible Onkyo
product. For example, selecting the TUNER input
source selects the UP-HT1, while selecting the
DOCK input source selects the dock (UP-A1, etc.)
connected to the UP-HT1's Universal Port. Note
that some Universal Port-compatible Onkyo prod-
ucts do not support this functionality, in which
case you will need to set the Mode Selector manu-
ally.

Connecting the Indoor FM Antenna

The supplied indoor FM antenna is for indoor use
only.
1.
Attach the FM antenna, as shown.
Insert the plug fully
into the jack.
Once your UP-HT1 is ready for use, you'll need to
tune into an FM radio station and adjust the posi-
tion of the FM antenna to achieve the best possible
reception.
7
En-