Brother GT-341 Instruction Manual page 102

4. Printing Directly from Applications
(3) Replace the Bush Platen Shaft with Platen Height Adjustment Lever assembled and the Platen Positioning
Plate to the "Platen Lowering Set" (option).
Platen positioning plate
Platen height adjustment lever
<Note>
Fix the Platen Positioning Plate by pushing it to the machined surface while the positioning jig is inserted into
the Platen Arm.
(4) Install the Platen as it is and fix it. The Platen Height Adjustment Lever is in the lower hole.
92
Bush platen shaft
Machined surface
Original position
After replacing to Platen Lowering Set,
the Platen height is lowered by 13 mm.
GT-3 Series
Positioning jig