Basic Connection; Connecting To A Television With Direct Cable Or Antenna (No Cable Box Or Satellite Receiver) - Panasonic DMR-EZ485V Operating Instructions Manual

Basic Connection

The connection diagrams represent typical installations. These diagrams may not work with certain in-
house cable systems, master antenna installations, or situations where TV programming is delivered using
methods that differ from industry accepted practices. If you require assistance with connections, please
contact Panasonic at 1-800-211-7262 (for U.S.A.) or 1-800-561-5505 (for Canada).
Connecting to a Television with Direct Cable or Antenna (No Cable Box or Satellite
Receiver)
Note: The terminals on the rear of your TV may not appear as shown below.
Please read terminal labels carefully to ensure correct connections.
Connection (with Audio/Video cable)
Connect in numbered order  to .
After this connection, set the RF output channel "OFF" ( 12).
 75  coaxial cable from the wall or antenna signal to the "RF IN" on the unit.
 75  coaxial cable (included) from the "RF OUT" on the unit to the "VHF/UHF RF IN" on
the TV.
 Audio/video cable (included) from the "DVD/VHS COMMON OUT" on the unit to the "AV
IN" on the TV.
Downloaded From Disc-Player.com Panasonic Manuals
8
 AC power supply cord (included) from the "AC IN" on the unit to a household AC outlet.
Cable from the wall
or antenna signal
step
1
RF
IN
RF
OUT
AC IN
VHF / UHF
step
4
To a household AC outlet
(AC 120 V, 60 Hz)
Rear of TV
AUDIO IN VIDEO
R L IN
Red White Yellow
step
3
Rear of this unit
Red White Yellow
DVD/VHS COMMON OUT
R-AUDIO-L DVD/VHS COMMON OUT VIDEO COMPONENT VIDEO OUT
R-AUDIO-L VIDEO Y P P
B R
S VIDEO S VIDEO
R-AUDIO -L VIDEO R-AUDIO-L O VIDEO
IN1 DVD PRIORITY OUT
Connection (without Audio/Video cable)
You do not need to connect .
After this connection, set the RF output channel "CH3" or
"CH4" ( 12).
VHF/UHF
RF IN
step
2
OPTICAL
DIGITAL AUDIO OUT
( (PCM/BITSTREAM) )