Copying Recordings; Copying Recordings (Vhs Dvd) - Panasonic DMR-EZ485V Operating Instructions Manual

Copying Recordings

Copying Recordings (VHS
When copying begins, the VHS tape is played back starting at the tape's
current position, and recorded to the disc.
[VHS] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Preparation:
 Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input, CH3 or CH4).
 [RAM] If the disc is protected, release protection (
 Insert a disc with enough space for recording.
 Set the DVD recording mode (determined by program length and
available time on selected media
 Insert the VHS tape containing the program to be copied. Stop the tape
at the point where you want to start copying from.
On the main unit
While both DVD and VHS are stopped
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
− or −
− COPY will appear in the unit's display when the copying process begins.
− Copying is automatically stopped when the tape reaches its end or the disc
becomes full.
Tips
 Additional navigation
You can begin the same kind of copy by using COPY Navigator. Use the operations
listed below instead of step 1 shown above.
1. Press [FUNCTIONS].
2. Press [, ] to select "Copy" then press [OK].
COPY Navigator screen appears.
3. Press [, ] to select "VHS to DVD" then press [OK].
 Segmenting a recording to be copied
When copying from VHS to DVD, recordings on the DVD are divided according to index
signals detected on the tape.
− Recordings that are too short may not be divided correctly.
− The time it takes to record may become longer than the original recording depending
on the number of index signals.
 To cancel copying in the middle
Press [ STOP].
− You can also press and hold [RETURN] for about 3 or more seconds to cancel copying
in the middle.
However, you cannot stop fi nalizing after it has started.
 When copying multilingual broadcast program
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Before starting copy, try playing the VHS and pressing [AUDIO], and then select audio
track that you want to copy. Audio can also be switched during copy.
Downloaded From Disc-Player.com Panasonic Manuals
20
DVD)
24).
Press and hold for about
3 seconds.
COPYING COPYING
REC
to copy and automatically fi nalize
when done
(see page 54 for more information on fi nalizing)
− If you press [ STOP], you can cancel copying.
PLAY
to copy without fi nalizing.
− If you press [ STOP], you can cancel copying.
52).
2
.
2
CH CH REC
COPYING COPYING
COPYING indicator
7 8 9
FAVORITE
0
DELETE
RESET SLOW/SEARCH
SKIP/INDEX REW EW W W FF FF FF
STOP PAUSE PLAY
CM SKIP CM SKIP
TIME SLIP / JET REW
OK
SUB MENU RETURN
CREATE
AUDIO DISPLAY VCR/TV
CHAPTER
A
B
REC REC MODE F Rec STATUS
Tips
 Icons such as " [RAM] " indicate
usable discs. Refer to pages 74
and 75.
Notes
 If copying doesn't complete due to
shortage of remaining time, disc
space, or other reasons, fi nalizing
won't start.
 When copying doesn't start, the
"COPYING" indicator on the main unit
blinks for about 7 seconds. Check if
the unit is properly prepared.
 If a part of a tape recorded in VP
mode is copied to disc, noise may
appear at the beginning of the copied
part.