Product Overview; Controls - Toro 74310 Operator's Manual

Product Overview

1. Speed-control lever

2. Controls

3. Fuel cap
Controls
Become familiar with all the controls before you start the
engine and operate the machine
1. Ignition switch
2. Hopper switch
3. Message display
4. Choke (not on EFI
machines)
Figure 4
4. Motion-control levers
5. PTO-engagement lever
6. Parking-brake lever
(Figure 4 and Figure
Figure 5
5. Throttle
6. Engine-oil temperature
light and buzzer
7. Check engine light (EFI
machines only)
Motion-Control Levers
Use the motion-control levers to drive the machine forward
and reverse, and to turn either direction.
Speed-Control Lever
The speed-control lever sets maximum forward speed of the
machine (Figure
to the N
EUTRAL
Throttle Control
The throttle control is variable between the F
positions.
Choke Control (Not on EFI machines)
Use the choke to start a cold engine. Move the choke to the
C /O
LOSED N
Note: Do not run a warm engine with choke in the O
position.
Brake Lever
The brake lever engages a parking brake on the drive wheels
(Figure 4).
Ignition Switch
This switch is used to start the mower engine and has 3
positions: S
TART
5).
Hour Meter
The hour meter records the number of hours the engine has
operated. The hour meter is recording when the decimal
point is flashing in the Hour/Voltage display. Use these times
for scheduling regular maintenance
1. Safety-interlock indicators
2. Hopper up
3. Hour/Voltage display
4. Low-voltage indicator light
15
4). Moving the speed-control lever rearward
position places the drive system into neutral.
position to start a cold engine.
, R , and O .
UN FF
(Figure
Figure 6
and S
AST LOW
N
6).