Connecting A Vcr - Onkyo HT-S3100 Instruction Manual

Connecting Your Components—Continued

Connecting a VCR

Connecting a VCR for Playback
Step 1: Video Connection (VCR to AV Receiver to TV)
Connect your VCR's video output jack to the AV receiver's VIDEO 1 IN jack and connect the AV receiver's
A
MONITOR OUT jack to your TV's video input jack.
If your VCR and TV have component video jacks, connect the VCR's component video output jacks to the AV
B
receiver's COMPONENT VIDEO VIDEO 1 IN jacks, and connect the AV receiver's COMPONENT VIDEO
OUT jacks to your TV's component video in jacks. This offers better picture quality than composite video.
Connect a TV antenna output jack (e.g., RF OUT) to your VCR's antenna input, and connect your VCR's antenna
C
output jack to your TV's antenna input jack.
Step 2: Audio Connection
Connect your VCR's audio output jacks to the AV receiver's VIDEO 1 IN L/R jacks.
a
HT-R340
B
Y P P
B R
COMPONENT VIDEO OUT
30
COMPONENT VIDEO IN
Y P P
B R
B
A
L R
VIDEO AUDIO
OUT OUT
TV, projector,
VIDEO IN
etc.
A
Coaxial feed from TV
antenna or set-top box
a
Antenna input
(e.g., RF IN)
VCR, DVD recorder
Antenna input
(e.g., RF IN)
Coaxial feed
C
Antenna output
(e.g., RF OUT)
: Signal Flow
C