General Operation - Siemens HiPath 2000 Manual

Hide thumbs Also See for HiPath 2000:

Table of Contents

Available languages

General operation

Local settings for optiPoint WL 2 professional

Main menu

In idle mode, press the UP ARROW on the CONTROL key (t). All

settings are saved locally and only apply for your handset.

Configuration using a Web interface

optiPoint WL 2 professional is equipped with an HTTP Web server.

This lets you display the contents of your handset on the Web

browser of a PC that is integrated in WLAN.

This can be used for:

•

access to parameters and lists

•

settings for your optiPoint WL 2 professional

•

importing ringer melodies

Prerequisite: The handset must be in idle mode.

Open a browser and enter the IP address of your handset.

You cannot make any entries using the keypad or accept

any incoming calls when the Web interface is being config-

ured.

To find out more information on this, read the operating manual for

your optiPoint WL 2 professional.

FCN (function key)

An entry in the FCN list is the same as a function key on an optiPoint

telephone. In other words, you can save specific functions from the

System menu in the FCN list and activate them whenever neces-

sary.

The function key LED on an optiPoint telephone is replaced by an an-

imated symbol in your optiPoint WL 2 professional.

You can save up to 12 entries (numbers, functions, procedures).

Main Menu

Hipath 3000