Appendix B: Safe Mode Firmware Update Procedures - Western Digital wd Cloud User Manual

Appendix B: Safe Mode Firmware Update Procedures

If you see the following screen, use the steps outlined below to recover your server from safe
mode.
Note: Before performing these steps, download WD Cloud firmware from the WD
support website
to which you can browse from your computer. Make sure to unzip the
firmware file.
1. Log on to your router's DHCP LAN/Device Client Table to obtain the IP address for your
device.
2. Type the device IP address in a browser window. The Safe Mode UI appears.
3. Browse to the location where you saved the downloaded firmware.
4. Click Apply to load the firmware.
5. On the dialog box, click OK. The device reboots.
6. Once your reboot is completed, ensure that you clear your browser's cache. Check
your browser's help to determine the best way to clear the cache.
7. Once your device has completed the reboot, we recommend that you do a system
restore ("Restore to Default" on page 75).
WD CLOUD USER MANUAL
(http://www.wdcloud.jp/support
APPENDICES
)
and save it to a location
92