Western Digital wd Cloud User Manual page 68

 Win XP: Establishes a connection through ports 80 and 443. If these ports are
unavailable, a relay connection is established. This option is required if you are
using Windows XP.
Note: By default, the WD Cloud device automatically establishes a direct
connection between your mobile devices and router.
4. In the Content Database field, click Rebuild, to rebuild your WDCloud database.
Note: Only perform this option to troubleshoot if you suspect database corruption.
5. Click Save. The Connection Status field indicates that your device is connected.
Energy Saver
The Energy Saver fields allow you to reduce the energy required to run your
WD Cloud device. Use the following information to configure the energy saving options on
your WD Cloud device.
View or change the following settings:
Drive Sleep
LED
Web Access
Timeout
Mac Backups
This section of the General screen enables or disables Time Machine backups of Mac
computers.
Important: You must set a password for your Admin account in order to restore
your Time Machine backups.
WD CLOUD USER MANUAL
Enabling this function allows the hard drives to go into
standby mode to save power after a designated period of
inactivity. Drive Sleep is enabled to sleep after
approximately 10 minutes by default.
• To enable/disable Drive Sleep, click the toggle button.
Enabling this function allows the device LEDs to go into
standby mode to save power. LED is enabled by default.
• To enable/disable LED, click the toggle button.
Automatically logs you out of the system after a
designated amount of time.
• From the Web Access Timeout drop-down menu,
select an amount of time you'd like to use for your
system timeout. The system updates automatically.
CONFIGURING SETTINGS
64