Storage - Toro 29518 Operator's Manual

Storage

1. Raise the tines, stop the machine, stop the engine, set
the parking brake, and remove the key.
2. Remove dirt and grime from the entire machine.
Important: You can wash the machine with mild
detergent and water. Do not pressure wash the
machine. Avoid excessive use of water, especially
near the engine and hydrostatic drive.
3. Service the air cleaner; refer to
Cleaner (page 30).
4. Lubricate the machine; refer to
Fittings (page 28).
5. Change the engine oil; refer to
Oil (page 31).
6. Check and tighten all bolts, nuts, and screws. Repair or
replace any part that is damaged.
7. Paint all scratched or bare metal surfaces. Paint is
available from your Authorized Service Dealer.
8. Store the machine in a clean, dry garage or storage area.
9. Cover the machine to protect it and keep it clean.
Servicing the Air
Lubricating the Grease
Changing the Engine
49