Table of Contents
Advertisement
Using Stabilizer/Conditioner
Use a fuel stabilizer/conditioner in the machine to provide
the following benefits:
•
Keeps gasoline fresh during storage of 90 days or less.
For longer storage it is recommended that the fuel tank
be drained.
•
Cleans the engine while it runs
•
Eliminates gum-like varnish buildup in the fuel system,
which causes hard starting
Important: Do not use fuel additives containing
methanol or ethanol.
Add the correct amount of gas stabilizer/conditioner to
the gas.
Note: A fuel stabilizer/conditioner is most effective
when mixed with fresh gasoline. To minimize the chance
of varnish deposits in the fuel system, use fuel stabilizer
at all times.
Filling the Fuel Tank
Note: Ensure that the engine is shut off and the motion
controls are in the parked position.
Note: You can use the fuel window to verify the presence of
gasoline before filling the tank
Important: Do not overfill fuel tank. Fill the fuel tank
to the bottom of the filler neck. The empty space in the
tank allows the fuel to expand. Overfilling may result in
fuel leakage, damage to the engine, or damage to the
emissions system.
B
A
D
E
(Figure
7).
C
g027243
Figure 7
Checking the Engine-oil Level
Before you start the engine and use the machine, check
the oil level in the engine crankcase; refer to
Engine-Oil Level (page
Breaking in a New Machine
New engines take time to develop full power. Mower decks
and drive systems have higher friction when new, placing
additional load on the engine. Allow 40 to 50 hours of
break-in time for new machines to develop full power and
best performance.
16
Checking the
30).
Advertisement
Table of Contents
