Initial Setup; First Time Setup - Onkyo DV SP504 Instruction Manual

Initial Setup

This chapter explains the settings you need to make the
very first time the DVD player is turned on.
ENTER

First Time Setup

The very first time you turn on the DVD player, the Ini-
tial Setup menu appears onscreen.
Initial Setup
TV Shape
HDMI Output Setting
On-Screen Language
Here you need to make a few settings to get the DVD
player up and running. You can change these settings
later (see page 45).
1
Use the Up and Down [
buttons to select a TV shape, and
Remote
then press [ENTER].
controller
Select "4:3 Letter box" or "4:3 Pan
Scan" if you have a 4:3 TV. Select
"16:9 Widescreen" or "16:9 Com-
pressed" if you have a widescreen TV.
See page 46 for more information.
Initial Setup
TV Shape
HDMI Output Setting
On-Screen Language
The "HDMI Output Setting" menu
appears next.
/
✔
4:3 Letter box
4:3 Pan Scan
16:9 Widescreen
16:9 Compressed
]/[ ]
✔
4:3 Letter box
4:3 Pan Scan
16:9 Widescreen
16:9 Compressed
2
Use the Up and Down [
buttons to select "On" or "Off"
Remote
for "HDMI Output Setting," and
controller
then press [ENTER]
Select "On" to use the HDMI output.
Initial Setup
TV Shape
HDMI Output Setting
On-Screen Language
The "On-Screen Language" menu
appears next.
3
Use the Up and Down [
buttons to select a language, and
Remote
then press [ENTER].
controller
See page 50 for more information on
the language options.
Initial Setup
TV Shape
HDMI Output Setting
On-Screen Language
The Initial Setup menu closes and the
setup is complete.
The DVD player is now ready to use.
Note:
• You can cancel the Initial Setup by pressing the
[SETUP] button and complete the settings later by
using the onscreen setup menus (see page 45).
]/[ ]
: 4:3 Letter box
✔
On
Off
]/[ ]
: 4:3 Letter box
: On
✔ English
Français
Español
Deutsch
Italiano
27