Toyota PRIUS Manual page 161

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
■
BY SELECTING "Release Tones"
"Release Tones" appear when a con-
tinuous tone signal(s) containing a (w)
is registered in the contact list.
This operation can be performed while
driving.
1
Select "Release Tones".
INFORMATION
●
A continuous tone signal is a character
string that consists of numbers and the
characters p or
056133w0123p#1)
●
When the "p" pause tone is used, the
tone data up until the next pause tone
will be automatically sent after 2 sec-
onds have elapsed. When the "w" pause
tone is used, the tone data up until the
next pause tone will be automatically
sent after a user operation is performed.
●
Release tones can be used when auto-
mated operation of a phone based ser-
vice such as an answering machine or
bank phone service is desired. A phone
number with continuous tone signals
can be registered in the contact list.
●
Tone data after a "w" pause tone can be
operated on voice command during a
call.
TRANSMIT VOLUME SETTING
1
Select "Transmit Volume".
2
Select the desired level for the transmit
volume.
w. (e.g.
3
Select "OK".
INFORMATION
●
The sound quality of the voice heard
from the other party's speaker may be
negatively impacted.
●
To reset the transmit volume, select
"Default".
●
"Transmit Volume" is dimmed when
mute is on.
PRIUS v_Navi_OM47B14U_(U)
15.06.04
6
161
12:24