Toyota PRIUS Manual page 136

1. VOICE COMMAND SYSTEM OPERATION
3
Say the command displayed on the
screen.
 Registered POIs, registered names in the
contacts list etc., can be said in the place
of the "<>" next to the commands.
(P.141)
For example: Say "Find nearby dining",
"Call John smith" etc.
 If a desired outcome is not shown, or if no
selections are available, perform one of
the following to return to the previous
screen:
• Say "Go back".
• Select "Go Back".
 To cancel voice recognition, select
cel"
, or press and hold the talk switch.
INFORMATION
●
If the system does not respond or the
confirmation screen does not disappear,
press the talk switch and try again.
●
"Voice Recognition Prompts" can be set
on the "Voice Settings" screen. (P.63)
●
Some voice guidance can be canceled
by setting voice prompts to off. Use this
setting when it is desirable to say a com-
mand immediately after pressing the talk
switch and hearing a beep.
136
■
DISPLAYING THE "Voice Settings"
SCREENS
 Selecting "Voice Settings" can be dis-
played the
(P.63)
■
INCREASING THE VOICE RECOG-
NITION PERFORMANCE
In order to improve voice recognition
performance, select "Train Voice Rec-
ognition" on the "Voice Settings" screen.

( P.63)
When "Train Voice Recognition" is se-
"Can-
lected, the user will be asked to say 10
sample phrases. This will help the voice
command system adapt to the user's ac-
cent.
VOICE COMMAND EXAMPLE:
LAUNCH Entune App Suite
APPLICATION
1
Press the talk switch.
2
Say "Launch <application name>".
 Entune App Suite application screen is
displayed.
PRIUS v_Navi_OM47B14U_(U)
"Voice Settings" screen.
15.06.04 12:24