Programming The Timers - Onkyo CR-315DAB Instruction Manual

Using the Timers—Continued

Programming the Timers

Notes:
• You must set the clock before you can program the
timers.
• Before programming a timer to turn on the radio, you
must preset the station you want to use. (See pages 43
and 44.)
• If you don't operate any buttons for 60 seconds while
programming a timer, the procedure will be cancelled
and the previous display will reappear.
STANDBY/ON
Number buttons
/
1
Press the [TIMER] button repeat-
edly to select timer 1, 2, 3, or 4, and
then press [ENTER].
If "Clock" appears, you need to set the
clock (see page 26).
2 Use the Previous and Next [
[
Rec, and then press [ENTER].
If you can't select Rec, make sure that
your Onkyo cassette deck or MD
recorder is properly connected to the
MD/TAPE jacks (pages 20 and 21) and
the Input Display is set accordingly
(page 29).
52
] buttons to select Play or
or
3
TIMER
4
ENTER
5
]/
6
Use the Previous and Next [
[ ] buttons to select the source,
and then press [ENTER].
You can select the following sources:
CR-515DAB
FM, AM, TAPE, DOCK, LINE1, LINE2,
DIGITAL, CD, or DAB.
CR-315DAB
FM, AM, TAPE, DOCK, LINE, CD, or
DAB.
If you selected Rec, CD cannot be
selected as the source.
If you selected AM, FM, or DAB,
use the Previous and Next [
[ ] buttons to select the radio
preset, and then press [ENTER].
If you selected Rec, make sure the
name of the connected recorder is
flashing on the display, and then
press [ENTER].
You can select TAPE or MD.
Use the Previous and Next [
[ ] buttons to select Once or
Every, and then press [ENTER].
Select Once for on-off operation. Select
Every to perform the same operation
every week.
]/
]/
]/