Mobile Assistant Operation; Mobile Assistant - Toyota PRIUS Manual

2. MOBILE ASSISTANT OPERATION

1. MOBILE ASSISTANT

The Mobile Assistant feature will
®
activate Apple's Siri Eyes Free mode
via the steering wheel switches. To
operate the Mobile
compatible cellular phone must be
registered and connected to this
®
system via Bluetooth
1
Press and hold this switch until you
hear the beeps.
2
The Mobile Assistant can be used only
when the following screen is displayed.
 To cancel the Mobile Assistant: Select
"Cancel", press the
wheel, or press and hold the
steering wheel.
 To restart the Mobile Assistant for addi-
tional commands, press the
steering wheel.
• Mobile Assistant can only be restarted
after the system responds to a voice
command.
144
• After some phone and music com-
Assistant, a
 The volume of the Mobile Assistant can
. (P.44)
INFORMATION
●
●
●
PS098IO
●
●
on the steering
on the
on the
mands, the Mobile Assistant feature will
automatically end to
requested action.
be adjusted using the "PWR
knob or steering wheel volume control
switches. The Mobile Assistant and
phone call volumes are synchronized.
The available features and functions
may vary based on the iOS version
installed on the connected device.
®
Some Siri features are limited in Eyes
Free mode. If you attempt to use an
unavailable function, Siri
you that the function is not available.
®
If Siri is not enabled on the cellular
phone connected via Bluetooth
error message will be displayed on the
screen.
While a phone call is active, the Mobile
Assistant cannot be used.
If using the navigation feature of the cel-
lular phone, ensure the active audio
®
source is Bluetooth audio or iPod in
order to hear turn by turn direction
prompts.
PRIUS_Navi_OM47A41U_(U)
complete the
·
VOL"
®
will inform
®
, an
15.09.16 19:45