Connecting Antenna Or Cable / Satellite / Iptv Set-Top Box; Plugging In The Ac Power Cord - Magnavox 40MV336X Owner's Manual

Hide thumbs Also See for 40MV336X:
Table of Contents

Advertisement

Connecting Antenna or Cable / Satellite /
IPTV Set-top Box
Be sure your Antenna or another Device is connected properly before

plugging in the AC Power Cord.

If connecting to an Antenna through an RF cable
Any DTV Programs that are Broadcast in your area can be received for
free through an Antenna Connection.
Cable
OUT
RF cable
If connecting Cable / Satellite / IPTV Set-top Box using an RF cable
If the TV is connected to a Cable or Set-top Box via a Coaxial Connection,
set the TV to channel 3/4 or the channel specified by the service provider.
RF cable
IN
Set-top Box
If connecting Cable / Satellite / IPTV Set-top Box using an HDMI
cable
If the TV is connected to a Cable / Satellite Set-top Box via an HDMI
cable, make sure you select the correct Source by using SOURCE.
RF cable
IN
Set-top Box
If connecting Cable / Satellite / IPTV Set-top Box using
Component Video Input
If the TV is connected to a Cable / Satellite Set-top Box via Component
Video Input, make sure you select the correct Component Video Source
by using SOURCE.
OUT
OUT
OUT
OUT
OUT
OUT
RF cable
IN
Set-top Box
75
IN IN IN
Antenna
75
IN IN IN
Antenna
OUT
OUT
OUT
RF cable
IN IN IN
OUT
HDMI cable
Component (Y/Pb/Pr)
Component (Y/Pb/Pr)
Component (Y/Pb/Pr)
IN IN IN
Video cables
Video cables
Video cables
IN IN IN
Audio (L/R) cables
Audio (L/R) cables
Audio (L/R) cables
Connecting a Cable / Satellite / IPTV Set-top Box, Blu-ray
Disc / DVD Recorder via Composite Connectors and
Analog Audio
Do Not place your Recorder too close to the Screen because some
Recorders can be susceptible to harmful interference from the TV.
Cable
Cable
Cable
OUT
OUT
OUT
RF cable
Video + Audio(L/R)
Video + Audio(L/R)
Video + Audio(L/R)
IN
OUT
Set-top Box
OUT
Note(s)
If you have any question about the DTV's Antenna, visit www.antennaweb.org for further
information.
Depending on your Antenna system, you may need different types of combiners
(mixers) or separators (splitters) for HDTV Signal. The minimum RF bandpass on
these Devices is 2,000MHz or 2GHz.
For your safety and to avoid damage to this Unit, please unplug the RF Coaxial Cable from
the Antenna Input jack before moving the Unit.
If you did use an Antenna to receive Analog TV, it should also work for DTV reception.
Outdoor or attic Antennas will be more effective than a Set-top Box or inside Antenna.
To Turn On your reception source easily between Antenna and Cable, Install an Antenna
selector.
If you are not receiving a Signal from your Cable service, contact the Cable provider.
Plugging in the AC Power Cord
Make sure that the AC power cord must be plugged to an AC outlet after
all the necessary connections are made.
Caution(s)
Connect the Analog Audio signal cables from the external device to the Analog Audio L/
R Input jacks.
Or if you have an amplifier, connect the HDMI cable to the HDMI input via your amplifier.
If you have an amplifier, connect the HDMI cable to the HDMI input via your amplifier.
Note(s)
Each time you plug in the AC Power Cord, no operations will be performed for several
seconds. This is not a malfunction.
12
RF cable
RF cable
RF cable
IN IN IN
IN IN IN
Video +
Video +
Video +
Audio(L/R)
Audio(L/R)
Audio(L/R)
cables
cables
cables
OUT
OUT
OUT
cables
cables
cables
IN
Blu-ray Disc /
DVD Recorder
Continued on next page.
.
English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents