Seat-Back-Adjusting Lever
Move the lever to adjust the seat-back angle.
Armrest-Adjusting Knob
Rotate the knob to adjust the angle of the armrest.
Info Center
Screen Functions
•
Press the corresponding button to view screen 1 or screen
2, to stop the audible alarm, to view the fault screen, or to
exit
(Figure
13).
Figure 13
1. Screen 1
2. Screen 2
3. Audible alarm
•
If a fault appears on the screen, press any key to view the
active fault advisory.
Note: Contact your supervisor or mechanic to relay the
fault advisory and determine the course of action.
•
Press the arrow keys to navigate the fault screen.
•
Press any key to reveal the information keys on the screen.
Operator Information
There are 2 screens that monitor and display the machine
functions that you can use.
Screen 1 displays the following:
•
Top, Left Gauge—Engine-Coolant Temperature
•
Top, Right Gauge—Fuel Level
•
Left to Right on the Bottom Half
4. Fault screen
5. Exit
1. PTO Engaged
2. Parking Brake Engaged
3. Fan Reversing
4. Cruise Control Engaged
5. H/L (High/Low speed range)
•
Bottom, Left Corner—Air-Intake Heater Active
•
Bottom, Middle—Traction Assist Engaged
•
Bottom, Right—Machine Hours
Screen 2 displays the following:
•
Top, Left Corner—Engine rpm
•
Top, Right Corner—Hydraulic-Oil Temperature
•
Lower, Left Corner—Battery Voltage
•
Lower, Right Corner—Service Due
19