Kenwood DNX4280BT Service Manual page 33

3. Screen position adjustment and Touch panel operation
• Adjustment & Inspection method
<1> Test mode is started. It is touches in order "Touch"
of the screen.
<2> It adjusts in the order of upper left, and lower right.
<3> Adjustment result is confirmed. (Display to "Write
OK"). It is touches in order "Return" of the screen.
Test Mode Main
Information Touch
Service
Ext SW
For FCT Tilt Mecha
Navigation LCD Backlight
Direct Select Steering Remote
<1>
Touch Adjust
Cancel
1-point
being input
<2>
Touch Adjust
Write OK/NG
<3>
ADJUSTMENT
DRAM OK
LCD
Illumi Bluethooth
iPod SW-Touch
Development
1 Rear Camera
Return
2-point
being input
Return
DNX4280BT/5180/5280BT/5380/5380M
/5380BT/5580BT/6040EX/6180/6480BT/6980
4. LCD_Back_Light RANK_Detect_Check
• Adjustment & Inspection method
Start the Test mode.
<1> Check of Rank.
<2> 2~8: "OK", 1: "NG"
Test Mode Main
Information Touch
Service
Ext SW
For FCT Tilt Mecha
Navigation LCD Backlight
Direct Select Steering Remote
5. Touch_Panel check
• Adjustment & Inspection method
<1> Test mode is started. It is touches in order "iPod" of
the screen.
<2> It is touches in order "iPod Check" of the screen.
<3> It is touches in order "iPod V-Play" of the screen.
<4> Were you able to push KEY?
OK: No problem, NG: Touch panel adjustment.
Test Mode Main
Information Touch
Service
Ext SW
For FCT Tilt Mecha
Navigation LCD Backlight
Direct Select Steering Remote
<1>
iPod
iPod Check
iPod V-Play
<2><3>
DRAM OK
LCD
Illumi Bluethooth
iPod SW-Touch
Development
Rear Camera
Return
LCD_Backlight Rank
DRAM OK
LCD
Illumi Bluethooth
iPod SW-Touch
Development
Rear Camera
Return
Cancel
33