Help And Specifications; Secondary And Inactive Stations; Hints And Tips - PURE Evoke-1S Owner's Manual

Help and Specifications

Secondary and inactive stations > Hints and tips > Technical Specifications

Secondary and inactive stations

(<</>>) Secondary DAB services
Secondary services accompany some stations, providing extra information or alternative content
and may only be broadcast at certain times. If a station has secondary services available, the
station shows '>>' next to its name in the station list and the secondary service appears next to
the station in the list. A secondary service has a '<<' before its name in the station list.
(?) Inactive or unavailable DAB stations
Inactive or unavailable stations appear on the station list preceded by '?' and cannot be tuned
to. A station may be inactive or unavailable because the station is not broadcasting at the current
time (check with the station) or has stopped broadcasting altogether. Also, you may not have a
strong enough signal to receive the Multiplex on which the station is broadcast.

Hints and tips

Display says 'No stations available'
Use Autotune (page 10) to search for stations. Try adjusting your aerial or radio position.
Receiving new DAB stations that have started broadcasting
Use Autotune (p 10) to scan for new stations and add any new DAB services to the station list.
The screen is very dark
Check that the light sensor on the front panel is not obstructed.
Using the alarm when a ChargePAK Model E1 is fitted
When the radio is powered by a ChargePAK Model E1 for portable listening, i.e., a ChargePAK
rechargeable battery is fitted and the unit is not connected to mains power, the radio switches off
completely when the Standby button is pressed and the alarm will not sound. In this case, the
message 'Disabling alarm' will be displayed when the Standby button is pressed.
Resetting your radio
Resetting your radio removes all presets, clears the station list and resets all options to defaults.
1. Press and hold the Menu button for three seconds.
2. Push the Tune dial within 3 seconds to confirm the reset or the reset will cancel.
Help and Specifications
13