Technical Specifications; Using A Pure Chargepak - PURE verona Owner's Manual

Technical Specifications

General
Frequency ranges DAB Band III 174–240 MHz, FM 87.5–108 MHz.
Speakers
Inputs
Outputs
Presets
Display
Power cable
Approvals
Dimensions (mm) 188 high x 280 wide x 100 deep.
Aerial
ChargePAK
Using a ChargePAK
PURE ChargePAK E1 is a rechargeable battery pack which plugs into the socket in the radio's
battery compartment. Whenever your radio is connected to a mains supply and the power
switch on the rear is switched on, the ChargePAK will be charging and the power remaining will
be available to view as a percentage in the Information display options (> page 5). A complete
charge will provide about 20 hours of portable listening.
To purchase a PURE ChargePAK E1, contact your nearest PURE dealer.
Important: Verona can only be powered with a PURE ChargePAK E1 and is not compatible with
any other batteries, either disposable or rechargeable, or any other ChargePAK model. Always
switch the unit off and disconnect it from mains power before inserting or removing a ChargePAK.
Charge a new ChargePAK for 24 hours before fi rst using battery power. Carefully follow the
separate fi tting instructions that are supplied.
14
Stereo digital radio with full Band III and FM reception. ETSI EN 300 401
compliant and capable of decoding all DAB and DAB
up to and including 192 kbps. Supports FM RDS and RadioText.
Two mid-range 3" drive units.
220-240V AC power socket for supplied power cable. 3.5mm Line-in for auxiliary
devices. USB (mini-B type) for software upgrades.
3.5mm headphone, 3.5mm line out (analogue).
50 DAB and 50 FM presets.
High contrast yellow graphical 128 x 22 Organic LED (OLED) display
Detachable mains lead supplied.
CE marked. Compliant with the EMC and Low Voltage Directives
(2004/108/EC and 2006/95/EC).
Telescopic aerial attached.
Compatible with PURE ChargePAK E1 (available seperately)
+
transmission modes 1-4
+ +
ChargePAK
™