Necessary Settings Before Use; Charging The Battery Pack - JVC GZ-MG135U Instructions Manual

Necessary Settings before Use

MENU
Set Lever
Be sure to confi gure the following three
settings before use.

Charging the Battery Pack

1
Set the power/mode switch to OFF.
Slide while pressing down the lock button.
Required charging / recording time
(approx.)
The values within ( ) are the times when the
LED light is on.
Battery pack Charging time
BN-VF808U
(Provided)
BN-VF815U
BN-VF823U
Downloaded From VideoCamera-Manual.com Manuals
12
Access/Charge Lamp
Power/Mode Switch
MODE
ON
OFF (CHARGE)
Recording
time
1 hr. 35 min.
1 hr. 30 min.
(1 hr. 30 min.)
3 hr. 15 min.
2 hr. 40 min.
(3 hr. 5 min.)
4 hr. 55 min.
3 hr. 50 min.
(4 hr. 35 min.)
2
Attach the battery pack.
Slide the battery pack down until it locks
in place.
Bottom of the Camera
3
Connect the AC adapter.
DC Connector
Open the cover.
•
You can also connect the AC adapter using
the Everio dock connector. (
•
The access/charge lamp blinks to indicate
charging has started.
•
When the lamp goes out, charging is
fi nished. Unplug the AC adapter from the
AC outlet and disconnect the AC adapter
from the camera.
8 To detach the battery pack
Slide and hold BATT. (
remove the battery pack.
8 To check the remaining battery power
See page 14.
NOTES
•
You can also use the camera with just the AC
adapter.
•
Please do not pull or bend the AC adapter plug
and cable. This may damage the AC adapter.
BATT.
AC Adapter
To AC Outlet
(110V to 240V)
pg. 6)
step 2), then